Using PowerMac machine description
Total memory = 640MB; using 2048kB for hash table (at cfe00000)
Linux version 2.6.19-gentoo-r6 (root@stanbook) (gcc version 4.1.1 (Gentoo 4.1.1)) #5 Mon Feb 26 02:01:21 CET 2007
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xc0
Mapped at 0xfdfc0000
Found a Pangea mac-io controller, rev: 0, mapped at 0xfdf40000
Processor NAP mode on idle enabled.
PowerMac motherboard: iBook FireWire
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
Entering add_active_range(0, 0, 163840) 0 entries of 256 used
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
nvram: Checking bank 0...
nvram: gen0=855, gen1=854
nvram: Active bank is: 0
nvram: OF partition at 0x210
nvram: XP partition at 0xffffffff
nvram: NR partition at 0xffffffff
Top of RAM: 0x28000000, Total RAM: 0x28000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 163840
Normal 163840 -> 163840
early_node_map[1] active PFN ranges
0: 0 -> 163840
On node 0 totalpages: 163840
DMA zone: 1280 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 162560 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 162560
Kernel command line: root=/dev/hda4 ro
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: on
time_init: decrementer frequency = 16.640000 MHz
time_init: processor frequency = 499.999995 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 641152k/655360k available (4792k kernel code, 13672k reserved, 428k data, 187k bss, 208k init)
Calibrating delay loop... 33.15 BogoMIPS (lpj=66304)
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,750@0, renamed to "l2-cache#1"
PM: Adding info for No Bus:platform
NET: Registered protocol family 16
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
channel 0 bus <multibus>
PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000
channel 1 bus <multibus>
channel 2 bus <multibus>
PCI: Probing PCI hardware
PM: Adding info for No Bus:pci0000:00
PM: Adding info for pci:0000:00:0b.0
PM: Adding info for pci:0000:00:10.0
PM: Adding info for No Bus:pci0001:10
PM: Adding info for pci:0001:10:0b.0
PM: Adding info for pci:0001:10:17.0
PM: Adding info for pci:0001:10:18.0
PM: Adding info for pci:0001:10:19.0
PM: Adding info for No Bus:pci0002:20
PM: Adding info for pci:0002:20:0b.0
PM: Adding info for pci:0002:20:0e.0
PM: Adding info for pci:0002:20:0f.0
PM: Adding info for platform:i2c-powermac.0
PM: Adding info for platform:i2c-powermac.1
PM: Adding info for platform:i2c-powermac.2
PM: Adding info for platform:i2c-powermac.3
PM: Adding info for platform:i2c-powermac.4
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ieee1394: Initialized config rom entry `ip1394'
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Registering PowerMac CPU frequency driver
Low: 400 Mhz, High: 499 Mhz, Boot: 499 Mhz
NTFS driver 2.1.27 [Flags: R/W DEBUG].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Apple UniNorth/Pangea chipset
agpgart: configuring for size idx: 8
agpgart: AGP aperture is 32M @ 0x0
[drm] Initialized drm 1.0.1 20051102
PCI: Enabling device 0000:00:10.0 (0086 -> 0087)
[drm] Initialized r128 2.5.0 20030725 on minor 0
aty128fb: Invalid ROM signature 63c7 should be 0xaa55
aty128fb: BIOS not located, guessing timings.
aty128fb: Rage128 LF M3 AGP [chip rev 0x0] 8M 128-bit SDR SGRAM (1:1)
aty128: Backlight initialized (aty128bl0)
Console: switching to colour frame buffer device 128x48
fb0: ATY Rage128 frame buffer device on Rage128 LF M3 AGP
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
PHY ID: 4061e3, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:48:8b:76
eth0: Found BCM5221 PHY
pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de
MacIO PCI driver attached to Pangea chipset
PM: Adding info for macio:0.80000000:mac-io
PM: Adding info for macio:0.00040000:interrup
PM: Adding info for macio:0.00000050:gpio
PM: Adding info for macio:0.00013000:escc
PM: Adding info for macio:0.00010000:i2s
PM: Adding info for macio:0.00015000:timer
PM: Adding info for macio:0.00016000:via-pmu
PM: Adding info for macio:0.0000f300:backligh
PM: Adding info for macio:0.00018000:i2c
PM: Adding info for macio:0.0001f000:ata-4
PM: Adding info for macio:0.00013020:ch-a
PM: Adding info for macio:0.00013000:ch-b
input: Macintosh mouse button emulation as /class/input/input0
apm_emu: APM Emulation 0.5 initialized.
PM: Adding info for platform:windfarm.0
adb: starting probe task...
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ISO, swapping keys.
input: ADB keyboard as /class/input/input1
input: ADB Powerbook buttons as /class/input/input2
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse as /class/input/input3
adb: finished probe task...
ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
Probing IDE interface ide0...
hda: TOSHIBA MK1017GAP, ATA DISK drive
PM: Adding info for No Bus:ide0
hdb: MATSHITADVD-ROM SR-8176, ATAPI CD/DVD-ROM drive
hda: Enabling Ultra DMA 2
hdb: Enabling Ultra DMA 2
ide0 at 0xe9036000-0xe9036007,0xe9036160 on irq 19
PM: Adding info for ide:0.0
PM: Adding info for ide:0.1
hda: max request size: 128KiB
hda: 19640880 sectors (10056 MB), CHS=19485/16/63, UDMA(33)
hda: cache flushes not supported
hda: [mac] hda1 hda2 hda3 hda4
hdb: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
mesh: configured for synchronous 5 MB/s
st: Version 20050830, fixed bufsize 32768, s/g segs 256
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0001:10:18.0 (0000 -> 0002)
ohci_hcd 0001:10:18.0: OHCI Host Controller
ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
eth0: Link is up at 100 Mbps, full-duplex.
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev1.1_ep81
PCI: Enabling device 0001:10:19.0 (0000 -> 0002)
ohci_hcd 0001:10:19.0: OHCI Host Controller
ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev2.1_ep81
Initializing USB Mass Storage driver...
usb 2-1: new low speed USB device using ohci_hcd and address 2
PM: Adding info for usb:2-1
PM: Adding info for No Bus:usbdev2.2_ep00
usb 2-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-1:1.0
PM: Adding info for No Bus:usbdev2.2_ep81
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input4
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0001:10:19.0-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver appletouch
mice: PS/2 mouse device common for all mice
PM: Adding info for No Bus:i2c-0
PowerMac i2c bus pmu 2 registered
PM: Adding info for No Bus:i2c-1
PowerMac i2c bus pmu 1 registered
PM: Adding info for No Bus:i2c-2
PowerMac i2c bus mac-io 0 registered
PM: Adding info for No Bus:i2c-3
PowerMac i2c bus uni-n 1 registered
PM: Adding info for No Bus:i2c-4
PowerMac i2c bus uni-n 0 registered
tas driver [TAS3001c driver V 0.3])
using i2c address: 0x34 from device-tree
PM: Adding info for i2c:2-0034
Audio jack unplugged, enabling speakers.
input: dmasound beeper as /class/input/input5
AE-Init tumbler mixer
PowerMac Tumbler DMA sound driver rev 016 installed
Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07
Write will use 4 fragments of 32768 bytes as default
Read will use 4 fragments of 32768 bytes as default
Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC).
snd-aoa-codec-tas: found 'deq' node
snd-aoa-codec-tas: failed to attach to i2c
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
IPv4 over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
input: PMU as /class/input/input6
Registered led device: pmu-front-led
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 208k init
EXT3 FS on hda4, internal journal
Adding 524280k swap on /dev/hda3. Priority:-1 extents:1 across:524280k
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
